Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Makrolon® 2456 RE CQ - PC - Covestro Deutschland AG

Material Data Center offers the following functions for Makrolon® 2456 RE CQ:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Makrolon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 光学特性 - 其它性能 - 试样制备条件
Any use of this information falls under the rules of our disclaimer.
材料文字说明
  • MVR (300 °C/1.2 kg) 19 cm³/10 min
  • food contact quality
  • low viscosity
  • easy release
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 19 cm³/10min ISO 1133
温度 300 °C -
载荷 1.2 kg -
模塑收缩率, 平行 0.7 % ISO 294-4, 2577
模塑收缩率, 垂直 0.7 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸模量 2400 MPa ISO 527
屈服应力 65 MPa ISO 527
屈服伸长率 6.2 % ISO 527
名义断裂伸长率 >50 % ISO 527
拉伸蠕变模量, 1h 2200 MPa ISO 899-1
拉伸蠕变模量, 1000h 1900 MPa ISO 899-1
无缺口简支梁冲击强度, +23°C N kJ/m² ISO 179/1eU
冲孔最大力, +23°C 5100 N ISO 6603-2
冲孔最大力, -30°C 6000 N ISO 6603-2
冲孔功, +23°C 55 J ISO 6603-2
冲孔功, -30°C 65 J ISO 6603-2
热性能价值单位Test Standard
ISO数据
玻璃化转变温度, 10°C/min 146 °C ISO 11357-1/-2
热变形温度, 1.80 MPa 125 °C ISO 75-1/-2
热变形温度, 0.45 MPa 138 °C ISO 75-1/-2
维卡软化温度, B 145 °C ISO 306
线性热膨胀系数, 平行 65 E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 65 E-6/K ISO 11359-1/-2
厚度为h时的燃烧性 V-2 class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
燃烧性－氧指数 28 % ISO 4589-1/-2
电性能价值单位Test Standard
ISO数据
相对介电常数., 100Hz 3.1 - IEC 62631-2-1
相对介电常数., 1MHz 3 - IEC 62631-2-1
介质损耗因子, 100Hz 5 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 90 E-4 IEC 62631-2-1
体积电阻率 >1E13 Ohm*m IEC 62631-3-1
表面电阻率 >1E15 Ohm IEC 62631-3-2
介电强度 34 kV/mm IEC 60243-1
相对漏电起痕指数 250 - IEC 60112
光学特性价值单位Test Standard
ISO Data
光输送 89 % ISO 13468-1, -2
其它性能价值单位Test Standard
吸水性 0.3 % 类似ISO 62
吸湿性 0.12 % 类似ISO 62
密度 1200 kg/m³ ISO 1183
试样制备条件价值单位Test Standard
ISO数据
注塑, 熔体温度 280 °C ISO 294
注塑, 模具温度 80 °C ISO 294
注塑, 注射速度 200 mm/s ISO 294
典型数据
特殊性能
透明.
Certifications
生物相容, 可食品接触的, ISCC Plus
地区供应
北美, 欧洲, 亚太, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.