Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ EXL Filament AMHI240F Black - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ EXL Filament AMHI240F Black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
其它性能 - 3D Data
Any use of this information falls under the rules of our disclaimer.
材料文字说明
LEXAN™ EXL AMHI240F filament is a high impact polycarbonate product available in black and white colors. It provides high impact strength and improved ductility over standard polycarbonate at room temperature and extreme low temperatures.
其它性能价值单位Test Standard
密度 1190 kg/m³ ASTM D 792
3D Data价值单位Test Standard
Other Standards[S]
拉伸模量, flat 1730 MPa ASTM D 638
拉伸模量, on-edge 1910 MPa ASTM D 638
拉伸模量, upright 1800 MPa ASTM D 638
断裂应力, flat 45 MPa ASTM D 638
断裂应力, on-edge 55 MPa ASTM D 638
断裂应力, upright 40 MPa ASTM D 638
断裂伸长率, flat 7 % ASTM D 638
断裂伸长率, on-edge 5 % ASTM D 638
断裂伸长率, upright 3 % ASTM D 638
弯曲模量, flat 1530 MPa ASTM D 790
弯曲模量, on-edge 1910 MPa ASTM D 790
弯曲模量, upright 1500 MPa ASTM D 790
无缺口简支梁冲击强度, +23°C, flat 88 kJ/m² ISO 179/1eU
无缺口简支梁冲击强度, +23°C, on-edge 151 kJ/m² ISO 179/1eU
无缺口简支梁冲击强度, +23°C, upright 23 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C, flat 19 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, +23°C, on-edge 30 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, +23°C, upright 6 kJ/m² ISO 179/1eA
热变形温度, 1.80 MPa, flat 139 °C ASTM D 6484
热变形温度, 1.80 MPa, on-edge 138 °C ASTM D 6484
热变形温度, 1.80 MPa, upright 138 °C ASTM D 6484
维卡软化温度, A, flat 148 °C ASTM D 1525
维卡软化温度, A, on-edge 149 °C ASTM D 1525
维卡软化温度, A, upright 149 °C ASTM D 1525
线性热膨胀系数, 平行, flat 77 E-6/K ASTM E 831
线性热膨胀系数, 平行, on-edge 80 E-6/K ASTM E 831
线性热膨胀系数, 平行, upright 79 E-6/K ASTM E 831
线性热膨胀系数, 垂直, flat 77 E-6/K ASTM E 831
线性热膨胀系数, 垂直, on-edge 81 E-6/K ASTM E 831
线性热膨胀系数, 垂直, upright 79 E-6/K ASTM E 831
厚度为h时的燃烧性, flat V-0 class UL 94
厚度为h时的燃烧性, on-edge V-0 class UL 94
厚度为h时的燃烧性, upright V-2 class UL 94
测试用试样的厚度 3.0 mm UL 94
体积电阻率, flat 1.4E13 Ohm*m ASTM D 257
体积电阻率, on-edge 1.5E13 Ohm*m ASTM D 257
体积电阻率, upright 1.5E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝, 黑色
特殊性能
高冲击韧性的/经抗冲改性的
特征
脆性
地区供应
北美, 欧洲, 中南美洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.