Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LAPEROS™ E480i - LCP-GF - Polyplastics

Material Data Center offers the following functions for LAPEROS™ E480i:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Laperos datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
弯曲模量, 23°C 16000 MPa ISO 178
弯曲强度 200 MPa ISO 178
简支梁缺口冲击强度, +23°C 35 kJ/m² ISO 179/1eA
洛克硬度 M 70 - ISO 2039-2
ASTM数据
拉伸强度 160 MPa ASTM D 638
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 270 °C ISO 75-1/-2
热变形温度, 0.45 MPa 285 °C ISO 75-1/-2
厚度为h时的燃烧性 V-0 class IEC 60695-11-10
Yellow Card 现存 是的 - -
电性能价值单位Test Standard
ISO数据
相对介电常数, 1MHz 4 - IEC 62631-2-1
介质损耗因子, 1MHz 300 E-4 IEC 62631-2-1
体积电阻率 1E14 Ohm*m IEC 62631-3-1
介电强度 42 kV/mm IEC 60243-1
相对漏电起痕指数 150 - IEC 60112
ASTM数据
耐电弧性 143 s ASTM D 495
其它性能价值单位Test Standard
密度 1710 kg/m³ ISO 1183
典型数据
特殊性能
阻燃的
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.