Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grilamid TR 90 natural - PAMACM12 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Check here, which other Grilamid datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Product-nomenclature: ISO 16396-PAMACM12,,GT,C14-020

 

Transparent Polyamide

Product Attributes

Highly transparent

Markets

	Automotive
	Automotive electr. and electronics, lighting, Cooling and climate control, Fuel systems, Powertrain and Chassis, Interior
	Electricals & Electronics
	Electrical appliances, Electrical equipment, Connectors, Energy distribution, Mobile phones and other portable devices, Lighting
	Industry & Consumer goods
	Heating systems, Housewares, Hydraulics & Pneumatics, Mechanical Engineering, Medical devices, Power transmission, Sanitary, water and gas supply, Sports & Leisure, Tools & Accessories
	Optics
	Lenses, Optical components, Safety glasses, Sunglasses, Spectacle frames
	Packaging
	Non oriented film, Cosmetics / Personal care, Medical packaging

Approvals

	Food Contact
	EU Requirements, FDA
	Medical
	USP VI, ISO 10993
	Potable Water Contact
	NSF 61, KTW, WRAS, DVGW W270

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
模塑收缩率, 平行	0.7 / *	%	ISO 294-4, 2577
模塑收缩率, 垂直	0.8 / *	%	ISO 294-4, 2577

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	1600 / 1600	MPa	ISO 527
屈服应力	60 / 60	MPa	ISO 527
屈服伸长率	7 / 6	%	ISO 527
名义断裂伸长率	>50 / >50	%	ISO 527
无缺口简支梁冲击强度, +23°C	N / N	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	N / N	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	13 / 13	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	12 / 12	kJ/m²	ISO 179/1eA
肖氏硬度D	81 / *	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
玻璃化转变温度, 10°C/min	155 / *	°C	ISO 11357-1/-2
热变形温度, 1.80 MPa	115 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	135 / *	°C	ISO 75-1/-2
线性热膨胀系数, 平行	90 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	90 / *	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	0.8 / *	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
体积电阻率	1E11 / 1E11	Ohm*m	IEC 62631-3-1
表面电阻率	* / 1E12	Ohm	IEC 62631-3-2
介电强度	34 / 34	kV/mm	IEC 60243-1
相对漏电起痕指数	- / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	3 / *	%	类似ISO 62
吸湿性	1.5 / *	%	类似ISO 62
密度	1000 / -	kg/m³	ISO 1183

函数

典型数据

加工方法

注塑, 其它挤出成型

供货形式

碎粒料, 自然色

特殊性能

透明.

Certifications

可食品接触的, FDA 21 CFR认证, 可水接触的, 可水接触的(KTW), 可水接触的(DVGW W270), NSF认证 61, 医用级, Biocompatibility ISO 10993, US药物六级认证

应用

汽车, 电子电气, 药物, 包装, 运动器械

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

其E烦龀尚

-- PIPE EXTRUSION --
-- SHEATING --
PROCESSING
Melt temperature : 250-270 °C
Feeding bush : 60-90
Barrel temp. profile : 240-250 °C
Head temp. : 250-240 °C

Please consider the information about the application of the materials.

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	乳酸 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硝酸 (40g/100g) (23°C)
	硫酸 (38g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
	铬酸溶液 (40g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
	氨水(氢氧化铵) (10g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	SAE 10W40号多效润滑油 (130°C)
	SAE 89/90号变速箱润滑油 (130°C)
	绝缘油 (23°C)
标准燃油
	ISO 1817 燃油1号 (60°C)
	ISO 1817 燃油2号 (60°C)
	ISO 1817 燃油3号 (60°C)
	ISO 1817 燃油4号 (60°C)
	不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
	含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
	柴油(优先使用F类ISO 1817液体) (23°C)
	柴油(优先使用F类ISO 1817液体) (90°C)
	柴油(优先使用F类ISO 1817液体) (>90°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	碳酸钠溶液 (20g/100g) (23°C)
	碳酸钠溶液 (2g/100g) (23°C)
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	过氧化氢 (23°C)
	DOT4号刹车油 (130°C)
	乙二醇水溶液 (50g/100g) (108°C)
	1g/100g 基苯氧- 聚环氧乙烷乙烯水溶液 (23°C)
	油酸 (50g/100g) + 橄榄油 (50g/100g) (23°C)
	水 (23°C)
	去离子水 (90°C)
	酚溶液(5g/100g) (23°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.