Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DuraPET™ 0624 PCR ST - PET - polyVisions, Inc.

Material Data Center offers the following functions for DuraPET™ 0624 PCR ST:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Durapet datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
模塑收缩率, 平行 0.6 % ISO 294-4, 2577
ASTM数据
熔融指数, MFI 14 g/10min ASTM D 1238
温度 285 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ASTM数据
拉伸模量 1919 MPa ASTM D 638
拉伸强度 47.8 MPa ASTM D 638
断裂伸长率 350 % ASTM D 638
弯曲模量 2238 MPa ASTM D 790
Gardner冲击强度 56.5 J ASTM D 2794,4226,5420
其它性能价值单位Test Standard
密度 1290 kg/m³ ISO 1183
典型数据
加工方法
注塑, 吹塑挤出成型, 其它挤出成型, 热成型
特殊性能
高冲击韧性的/经抗冲改性的
特征
脆性
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.