Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 510GR NC000 - POM-GF10 - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 510GR is a 10% glass-reinforced acetal homopolymer for injection molding.  It has high strength, stiffness, and high deflection temperature and excellent creep resistance.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	12	cm³/10min	ISO 1133
温度	190	°C	-
载荷	2.16	kg	-
模塑收缩率, 平行	1.0	%	ISO 294-4, 2577
模塑收缩率, 垂直	1.4	%	ISO 294-4, 2577
ASTM数据
熔融指数, MFI	7	g/10min	ASTM D 1238
模压收缩率, 平行	0.01	mm/mm	ASTM D 955
模压收缩率, TD	0.0135	mm/mm	ASTM D 955

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	5500	MPa	ISO 527
断裂应力	105	MPa	ISO 527
断裂伸长率	3.7	%	ISO 527
拉伸蠕变模量, 1h	4800	MPa	ISO 899-1
拉伸蠕变模量, 1000h	3500	MPa	ISO 899-1
无缺口简支梁冲击强度, +23°C	50	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	50	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	6.5	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	5	kJ/m²	ISO 179/1eA
ASTM数据
拉伸模量	6100	MPa	ASTM D 638
拉伸强度	100	MPa	ASTM D 638
断裂伸长率	5	%	ASTM D 638
弯曲模量	4300	MPa	ASTM D 790
洛克硬度	R 119	-	ASTM D 785
悬臂梁缺口冲击强度, 1/8 in	53	J/m	ASTM D 256

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	178	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	164	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	174	°C	ISO 75-1/-2
维卡软化温度, B	160	°C	ISO 306
线性热膨胀系数, 平行	70	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	100	E-6/K	ISO 11359-1/-2
厚度为h时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	0.8	mm	-
Yellow Card 现存	是的	-	-
ASTM数据
UL94 燃烧性	HB	-	UL 94
测试厚度	0.75	mm	-
热释放速率, 平行	70	E-6/K	ASTM D 696
热释放速率, 垂直	100	E-6/K	ASTM D 696
DTUL @ 66 psi	176	°C	ASTM D 648
DTUL @ 264 psi	170	°C	ASTM D 648
熔点	178	°C	ASTM D 3418

电性能	价值	单位	Test Standard
ISO数据
相对介电常数., 100Hz	3.7	-	IEC 62631-2-1
相对介电常数., 1MHz	3.9	-	IEC 62631-2-1
体积电阻率	1E11	Ohm*m	IEC 62631-3-1
相对漏电起痕指数	600	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	1.1	%	类似ISO 62
吸湿性	0.16	%	类似ISO 62
密度	1490	kg/m³	ISO 1183
密度	1470	kg/m³	ASTM D 792

函数

典型数据

加工方法

注塑

供货形式

粒料, 自然色

添加剂

脱模助剂

特征

防蠕变, 防老, 均聚物

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases:

·         If moisture is above the Processing Moisture Content recommendation,

·         When a resin container is damaged,

·         When the material is not properly stored in a dry place at room temperature, or

·         When packaging stays open for a significant time.

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.