Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ALFATER XL A60I 2UV0000 UV - TPV - MOCOM Compounds GmbH & Co. KG

Material Data Center offers the following functions for ALFATER XL A60I 2UV0000 UV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Alfater datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
材料类型PP/EPDM共混硫化热塑性弹性体
颜色本色
工作温度最大范围 （取决于负载，几何尺寸等） -40-125 °C
主要特征抗UV,gutes Rückstellvermögen,良好的耐气候性,良好的抗化学性,耐臭氧,耐热空气,耐水解
市场分类汽车,建筑,电子电器,机械,家具
应用范围注塑部件
主要应用密封件,密封件,手柄,Soft-Touch Elemente,冲击防护/减震器,防护帽,Kabeldurchführungen,Laufrollen,Stopfen,Verbindungselement,2K-Bauteile
粘接于均聚聚丙烯,Polypropylen Copolymer,聚乙烯,PP/EPDM共混硫化热塑性弹性体,烯烃类热塑性弹性体,常用热塑性弹性体
机械性能价值单位Test Standard
ISO数据
撕裂强度 30 kN/m ISO 34-1
肖氏硬度A 60 - ISO 7619-1
其它性能价值单位Test Standard
密度 930 kg/m³ ISO 1183
典型数据
加工方法
注塑
供货形式
自然色
特殊性能
经耐紫外线处理的/耐气候的
特征
好粘附性能, 软质
耐化学试剂
通用耐化学性, 水解稳定, 抗臭氧性
应用
汽车, 建材, 电子电气
地区供应
北美, 欧洲, 亚太, 中东/非洲
其他信息
注塑成型
烘干条件在干燥空气（除湿）干燥器里 70-80 °C
for 2-4 h
不必要的 <0,10 %
注塑成型工艺注塑熔体温度 195-230 °C
注塑模具温度 10-60 °C
高注塑速度
>5 bar
Nachdruck 50-70 % vom Spritzdruck
储存干燥，避免光照
不高于30°C
fest verschlossen
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.