Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PP RELY 61EK61PS - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PP RELY 61EK61PS:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
This impact copolymer has a high molecular weight and is provided with a long-term heat stabilisation package. It exhibits extra high stiffness in combination with very high impact strength even at low temperatures. This material is typically used for extrusion of non-pressure sewage pipe applications and can also be typically used for blow-moulding of large containers and sheet extrusion. Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site http://www.SABIC.com IMDS 80775790
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 1850 МПа ISO 527
Напряжение в точке текучести 40 МПа ISO 527
Удлинение в точке текучести 8 % ISO 527
Ударная прочность по Шарпи, +23°C N кДж/м2 ISO 179/1eU
Ударная прочность по Шарпи с надрезом, +23°C N кДж/м2 ISO 179/1eA
Ударная вязкость по Изоду образцов с надрезом 5 кДж/м2 ISO 180/1A
Твердость по Шору D 70 - ISO 7619-1
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура размягчения по Вика, A 155 °C ISO 306
Температура размягчения по Вика, B 80 °C ISO 306
Особые свойства и характеристики
Особые показатели
Термостабилизированный или стойкий к воздействию тепла
Специальные характеристики
Сополимер
Сертификаты
Контакт с пищей
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.