Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 6318B - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 6318B:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Теплофизические свойства - Оптические свойства - Свойства пленки
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
6318BJ resin is a hexene comonomer based Linear Low Density Polyethylene TNPP free grade designed to provide easy processability and specially formulated for optimum thermal stability at high processing temperatures used during production of Cast films. Films produced using this resin gives excellent optical properties, toughness, puncture resistance and tear strength.
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура размягчения по Вика, A 105 °C ISO 306
Оптические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Мутность 1.7 % ASTM D 1003
Свойства пленкиЗначениеЕдиницаСтандарт
ASTM Data
Модуль упругости при растяжении, продольный 100 МПа ASTM D 882
Модуль упругости при растяжении, поперечный 210 МПа ASTM D 882
Предел текучести, продольный 13 МПа ASTM D 882
Предел текучести, поперечный 10 МПа ASTM D 882
Предел прочности, продольный 33 МПа ASTM D 882
Предел прочности, поперечный 26 МПа ASTM D 882
Относительное удлинение при разрыве, продольный 600 % ASTM D 882
Относительное удлинение при разрыве, поперечный 800 % ASTM D 882
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.