Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® TIEFLEX R463 BLACK TLCP - PA* - ARKEMA

Material Data Center offers the following functions for Rilsan® TIEFLEX R463 BLACK TLCP:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Rilsan® TIEFLEX R463 BLACK TLCP resin is a flexible tie layer alloy partially based on renewable resources. This grade is designed for air brake application (tie layer for air brake tubing).

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.
Технологические и физические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Показатель текучести расплава, ПТР 8.9 / * см³/10мин ISO 1133
Температура 235 / * °C -
Нагрузка 5 / * kg -
Механические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении - / 540 МПа ISO 527
Напряжение в точке текучести - / 29 МПа ISO 527
Удлинение в точке текучести - / 50 % ISO 527
Номинальное удлинение при разрыве - / >50 % ISO 527
Ударная вязкость по Шарпи с надрезом, -30°C - / 9 кДж/м2 ISO 179/1eA
Теплофизические свойствасухой / кондЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 214 / * °C ISO 11357-1/-3
Прочие свойствасухой / кондЕдиницаСтандарт
Плотность 1080 / - кг/м³ ISO 1183
Особые свойства и характеристики
Способы переработки
Экструзия (прочие виды)
Вид поставки
Гранулы, Черный
Сертификаты
Содержит возобновляемые ресурсы
Доступность материала по регионам
Другая текстовая информация
Экструзия других изделий
Processing conditions
- Typical melt temperature (min / recommended / max): 220°C / 230°C / 240°C
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-6 hours at 80°C
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.