Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Polylan ABS 3O 51 - ABS - Polyma Kunststoff GmbH & Co.KG

Material Data Center offers the following functions for Polylan ABS 3O 51:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polylan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Механические свойства - Теплофизические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Other Standards[S]
Показатель текучести расплава, ПТР 12 г/10 мин DIN 53735
Температура 220 °C -
Нагрузка 10 kg -
S: These properties are reported by the producer according standards that are different to our defaults.
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Ударная прочность по Шарпи с надрезом, +23°C 10 кДж/м2 ISO 179/1eA
Ударная вязкость по Изоду образцов с надрезом, +23°C 17 кДж/м2 ISO 180/1A
Other Standards[S]
Модуль упругости при растяжении 4200 МПа DIN 53457
S: These properties are reported by the producer according standards that are different to our defaults.
Теплофизические свойстваЗначениеЕдиницаСтандарт
Other Standards[S]
Температура размягчения по Вика, B 95 °C DIN 53460
S: These properties are reported by the producer according standards that are different to our defaults.
Прочие свойстваЗначениеЕдиницаСтандарт
Other Standards[S]
Плотность 1060 кг/м³ DIN 53479
S: These properties are reported by the producer according standards that are different to our defaults.
Особые свойства и характеристики
Вид поставки
Черный
Доступность материала по регионам
Европа
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.