Material datasheets available free. Online registration at: www.materialdatacenter.com
Impet - PET - Celanese
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Impet" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...igh demands (Fig.2). A spin-off of the improved dimensional accuracy is more precise centring. Whereas conventionally moulded sensors deviate by 2 to 5°, the corresponding figure for the new sensor is just 0.5°. Ticona’s Celanex (PBT), Impet (PET), Fortron (PPS) and Hostaform (POM) ranges are eminently suitable for this technique. Naturally, given that the technique is still in its infancy, close cooperation between customer, production factory and material supplier is vital. Laser Weld...
Kunststoffe international, 2005-11-21, Medical Technology for the Mass Market
...hout altering the formulation. Ticona has eight families of engineering plastics in its range which have proved their suitability for the field of medical technology over many years: POM (grade: Hostaform/Celcon), PBT (grade: Celanex), PET (grade: Impet), TPE-E (grade: Riteflex), LCP (grade: Vectra), COC (grade: Topas), PE-UHMW (grade: GUR) and PPS (grade: Fortron). Depending on the particular grade, these plastics fulfil all the decisive requirements for medical technology, such as exceptionall...
Kunststoffe international, 2005-11-21, Special Grades Required: PET Compounds
...to the oscillating, angular movement of the wiper driving axle by means of a worm gear. On these so-called swivel bearing motors, high mechanical stressing occurs at the inversion point. The rigid housing in Ticona's glass-fibre reinforced Impet is able to withstand precisely this stressing, while also keeping the noise level low. This plastic also saves several assembly steps, because, with injection moulding, the pivot for the necessary bearing can be placed directly in the mould and have ...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.