Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 5533 SN 70 BLACK - TPA-CD... - ARKEMA

Material Data Center offers the following functions for Pebax® 5533 SN 70 BLACK:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SN 70 grade is made conductive thanks to carbon black.


Main applications:
  • Conductive injected parts
  • Hose for fuel transportation


Packaging:

This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 5 / * cm³/10min ISO 1133
Temperatura 250 / * °C -
Carga 5 / * kg -
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 305 / 298 MPa ISO 527
Tensão no escoamento 18 / 17 MPa ISO 527
Deformação no escoamento 31 / 36 % ISO 527
Deformação nominal na ruptura >50 / >50 % ISO 527
Res. impacto Charpy c/entalhe, -30°C - / 18 kJ/m² ISO 179/1eA
Dureza Shore D 60 / * - ISO 7619-1
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 159 / * °C ISO 11357-1/-3
Coef. de expansão térmica linear, paralelo 220 / * E-6/K ISO 11359-1/-2
Flamabilidade a 1.5mm esp. nom. HB / * class IEC 60695-11-10
Espessuras do tubo de teste 1.6 / * mm -
Flamabilidade a espessura h HB / * class IEC 60695-11-10
Espessuras do tubo de teste 3.2 / * mm -
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 110000 / - Ohm*m IEC 62631-3-1
Resistividade superficial específica * / 5500 Ohm IEC 62631-3-2
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 1.2 / * % Sim. to ISO 62
Absorção de umidade 0.5 / * % Sim. to ISO 62
Densidade 1090 / 1090 kg/m³ ISO 1183
Diagrama
Módulo de cisalhamento dinâmico - temperatura , Pebax® 5533 SN 70 BLACK (dry), TPA-CD..., ARKEMA
Tensão - deformação , Pebax® 5533 SN 70 BLACK (dry), TPA-CD..., ARKEMA
Módulo secante - deformação , Pebax® 5533 SN 70 BLACK (dry), TPA-CD..., ARKEMA
Características
Processamento
Moldagem por injeção, Extrusão de laminas, Extrusão de perfis, Outros tipos de extrusão, Moldagem por transferência, Extrusão de filmes planos, Termoformagem
Forma de entrega
Granulos, Negro
Características especiais
Condutividade eléctrica aumentada, Antiestático, Galvanizável, Estável a luz, Estabilidade a raios U.V./Intempéries, Estável contra o calor
Disponibilidade regional
Outras informações
Moldagem por injeção

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
- Typical mold temperature : 25 – 60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.
Outros tipos de extrusão

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.