Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® 5533 SN 70 BLACK - TPA-CD... - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Pebax® 5533 SN 70 BLACK resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide.
This SN 70 grade is made conductive thanks to carbon black.


Main applications:

• Conductive injected parts
• Hose for fuel transportation

Packaging:
This grade is delivered dried in sealed packaging (20 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	5 / *	cm³/10min	ISO 1133
온도	250 / *	°C	-
하중	5 / *	kg	-

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	305 / 298	MPa	ISO 527
항복강도	18 / 17	MPa	ISO 527
항복변형률	31 / 36	%	ISO 527
파단시 평균신율	>50 / >50	%	ISO 527
챠피 노치드 충격 강도, -30°C	- / 18	kJ/m²	ISO 179/1eA
쇼어 D 경도	60 / *	-	ISO 7619-1

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	159 / *	°C	ISO 11357-1/-3
선형 열팽창 계수, 평행	220 / *	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	HB / *	class	IEC 60695-11-10
테스트 두께	1.6 / *	mm	-
두께 H인 제품의 난연성	HB / *	class	IEC 60695-11-10
테스트 두께	3.2 / *	mm	-

전기적 특성	건조/응축	단위	시험규격
ISO 데이터
부피 저항	110000 / -	Ohm*m	IEC 62631-3-1
표면 저항	* / 5500	Ohm	IEC 62631-3-2

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	1.2 / *	%	ISO 62와 유사
조건에서의 흡습성	0.5 / *	%	ISO 62와 유사
밀도	1090 / 1090	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형, 필름 압출, 외형 압출, 기타 압출, 트랜스퍼 성형, 주조, 열성형

인도 유형

펠렛 (입자,알갱이), 검정

특별 특성

증가된 전기전도성, 정전기 방지, 도금가능한, 가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 200°C / 240°C / 270°C.
- Typical mold temperature : 25 – 60°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

기타 압출

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 65-75°C.

화학적 매체에 대한 저항력

산
	에서의 황산 (질량 38%) (23°C)
염기
	에서의 수산화나트륨 용액 (질량 1%) (23°C)
알코올
	23 °C에서의 에탄올 (23°C)
탄화수소
	에서의 이소옥탄 (23°C)
케톤
	에서의 아세톤 (23°C)
염액
	에서의 염화아연 용액 (질량 50%) (23°C)
기타
	에서의 물 (23°C)

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.