Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adsyl 6 C 30 F - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adsyl 6 C 30 F:
unit conversion, PDF datasheet print

Check here, which other Adsyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 5.5 g/10min ISO 1133
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 128 °C ISO 11357-1/-3
Temperatura de deflexão térmica , 0.45 MPa 59 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 103 °C ISO 306
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 92 - ASTM D 2457
Haze 0.2 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 900 kg/m³ ISO 1183
Propriedades do filmeValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração, paralelo 260 MPa ISO 527-3
Módulo de tração, perpend. 250 MPa ISO 527-3
Tensão no escoamento, paralelo 14 MPa ISO 527-3
Tensão no escoamento, perpend. 14 MPa ISO 527-3
Deformação no escoamento, paralelo 16 % ISO 527-3
Deformação no escoamento, perpend. 14 % ISO 527-3
Tensão na ruptura, paralelo 37 MPa ISO 527-3
Tensão na ruptura, perpend. 41 MPa ISO 527-3
Deformação Máxima, paralelo 850 % ISO 527-3
Deformação Máxima, perpend. 900 % ISO 527-3
Tipo de extrusão cast - -
Espessura de corpo de prova 0.05 mm -
Características
Processamento
Extrusão de laminas
Características
Heat Sealable
Certifications
Contacto com alimentos, Aprobación del 1935/2004/EG, Aprovação para contacto com alimentos10/2011, Aprovação de alimentos FDA 21 CFR
Aplicaciones
Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.