Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Adsyl 6 C 30 F - PP - LyondellBasell Industries

Material Data Center offers the following functions for Adsyl 6 C 30 F:
unit conversion, PDF datasheet print

Check here, which other Adsyl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 5.5 g/10min ISO 1133
Température 230 °C -
Charge 2.16 kg -
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fusion, 10°C/min 128 °C ISO 11357-1/-3
Température de fléchissement s/chrg, 0.45 MPa 59 °C ISO 75-1/-2
Température de ramolliss. Vicat, A 103 °C ISO 306
Propriétés optiquesValeurUnitéNorme du test
ASTM Data
Brillant 92 - ASTM D 2457
Haze 0.2 % ASTM D 1003
Propriétés diversesValeurUnitéNorme du test
Masse volumique 900 kg/m³ ISO 1183
Propriétés mécaniques (Grades film)ValeurUnitéNorme du test
ISO Data
Module en traction, parallèle 260 MPa ISO 527-3
Module en traction, perpend. 250 MPa ISO 527-3
Contrainte au seuil, parallèle 14 MPa ISO 527-3
Contrainte au seuil, normal 14 MPa ISO 527-3
Déformation au seuil, parallèle 16 % ISO 527-3
Déformation au seuil, perpend. 14 % ISO 527-3
Contrainte à la rupture, parallèle 37 MPa ISO 527-3
Contrainte à la rupture, perpend. 41 MPa ISO 527-3
Déformation maximale, parallèle 850 % ISO 527-3
Déformation maximale, perpend. 900 % ISO 527-3
Type d'extrusion cast - -
Epaisseur des eprouvettes 0.05 mm -
Caractéristiques
Transformation
Extrusion de films
Caractéristiques
Soudage à la chaleur
Certifications
Contact alimentaire, Approuvé pour le contact alimentaire suivant 1935/2004/CE, Approuvé pour le contact alimentaire suivant 10/2011, FDA 21 CFR approbation
Applications
Emballage
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America, Proche-Orient/Afrique
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.