Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound G3240U - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound G3240U:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção
Any use of this information falls under the rules of our disclaimer.
Informação do produto
SABIC® PPcompound G3240U is a general purpose, 40% glass filled, chemically coupled, heat stabilized and UV stabilized homopolymer polypropylene compound. IMDS ID: 209768078
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 8900 MPa ISO 527
Tensão na ruptura 110 MPa ISO 527
Deformação na ruptura 2.9 % ISO 527
Módulo de flexão, 23°C 8900 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 10 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 13 kJ/m² ISO 179/1eA
ASTM Dados
Módulo de tração 7610 MPa ASTM D 638
Resistência à tração na ruptura 120 MPa ASTM D 638
Deformação na ruptura 2.4 % ASTM D 638
Módulo de flexão 7800 MPa ASTM D 790
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 153 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 161 °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 164 °C ISO 306
ASTM Dados
DTUL @ 66 psi 161 °C ASTM D 648
DTUL @ 264 psi 153 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1220 kg/m³ ISO 1183
Densidade 1220 kg/m³ ASTM D 792
Recomendação de processamento Moldagem por injeçãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 80 - 100 °C -
Pré-secagem - tempo 2 - 4 h -
Temperatura da massa 210 - 270 °C -
Temperatura do molde 15 - 60 °C -
Zona 1 190 - 230 °C -
Zona 2 200 - 250 °C -
Zona 3 210 - 270 °C -
Temperatura do bico 210 - 270 °C -
Contrapressão 1 - 1.5 MPa -
Características
Características especiais
Estabilidade a raios U.V./Intempéries, Estável contra o calor
Características
Homopolímero
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.