Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 518NJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 518NJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades térmicas - Propriedades ópticas - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Informação do produto
SABIC® LLDPE 518NJ is a fractional melt-index butene linear low density polyethylene resin. Films produced from this resin have high toughness, good puncture resistance, good heat sealing behaviour and excellent machinability on conversion lines. This grade is TNPP free.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 0.5 g/10min ASTM D 1238
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de amolecimento Vicat , A 104 °C ISO 306
ASTM Dados
Temperatura de amolecimento Vicat 100 °C ASTM D 1525
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 13 % ASTM D 1003
Propriedades do filmeValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração, paralelo 170 MPa ISO 527-3
Módulo de tração, perpend. 180 MPa ISO 527-3
Tensão no escoamento, perpend. 11 MPa ISO 527-3
Tensão na ruptura, paralelo 40 MPa ISO 527-3
Tensão na ruptura, perpend. 32 MPa ISO 527-3
Resistência ao rasgamento Trouser, paralelo 30 N/mm ISO 6383-1
Resistência ao rasgamento Trouser, perpend. 180 N/mm ISO 6383-1
ASTM Data
Módulo de tração, long. 43 MPa ASTM D 882
Módulo de tração, trans. 850 MPa ASTM D 882
Resistência à tração no escoamento, long. 13 MPa ASTM D 882
Resistência à tração no escoamento, trans. 11 MPa ASTM D 882
Resistência à tração na ruptura, long. 34 MPa ASTM D 882
Deformação na ruptura, long. 700 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.