Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® HT CESV BLACK P010 TL - PA* - ARKEMA

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

PA11/10T-I,,EHL,C16-010

Rilsan® HT CESV BLACK P010 TL  is a flexible polyphthalamide produced from a renewable source, typical used to replace metal in tubing for high-temperature automotive, transportation and other demanding technical  applications.

The percentage of renewable carbon is 45% (calculated value, based on ASTM D6866).

Main applications:

• Thermoplastic lines for automotive & transportation applications such as high temperature air/vacuum
• aggressive media and oil management systems
• cooling and selective catalyst reduction lines etc
• Hydraulic and pneumatic lines

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit,  please refer to our technical services.

Características de processamento/físicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR	1.9 / *	cm³/10min	ISO 1133
Temperatura	300 / *	°C	-
Carga	5 / *	kg	-

Propriedades mecânicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Módulo de tração	- / 1015	MPa	ISO 527
Tensão no escoamento	- / 30	MPa	ISO 527
Deformação no escoamento	- / 5	%	ISO 527
Deformação nominal na ruptura	- / >50	%	ISO 527
Res. impacto Charpy c/entalhe, +23°C	- / 84	kJ/m²	ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C	- / 16	kJ/m²	ISO 179/1eA
Dureza Shore D	66 / *	-	ISO 7619-1

Propriedades térmicas	Seco / Cond	Unidade	Método de ensaio
ISO Dados
Temperatura de fusão, 10°C/min	260 / *	°C	ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min	82 / *	°C	ISO 11357-1/-2
Temperatura de deflexão térmica, 1.80 MPa	66 / *	°C	ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa	82 / *	°C	ISO 75-1/-2

Outras propriedades	Seco / Cond	Unidade	Método de ensaio
Densidade	1050 / -	kg/m³	ISO 1183
Biobased content	45	%	-

Diagrama

Características

Processamento

Extrusão de perfis, Outros tipos de extrusão

Forma de entrega

Granulos, Negro

Características especiais

Alto impacto., Estável a luz, Estabilidade a raios U.V./Intempéries, Estável contra o calor

Certifications

Contém recursos renováveis

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Outras informações

Extrusão de perfis

Processing conditions :
- Typical  melt temperature (Min / Recommended / Max) : 270°C / 280°C / 290°C.
- Drying time and temperature (only for bags opened for more than two hours) :  8 - 12 hours  at 70 °C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.