View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RTP 300 HF FR A - PC - RTP Company

Material Data Center offers the following functions for RTP 300 HF FR A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other RTP datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção

Any use of this information falls under the rules of our disclaimer.

Características de processamento/físicas

Valor

Unidade

Método de ensaio

ASTM Dados

Índice de fluidez, MFI

g/10min

ASTM D 1238

Temperatura

300

°C

Carga

1.2

Contração após a moldagem, paralelo

0.008

mm/mm

ASTM D 955

Propriedades mecânicas

Valor

Unidade

Método de ensaio

ASTM Dados

Módulo de tração

2275

MPa

ASTM D 638

Resistência à tração

55.2

MPa

ASTM D 638

Módulo de flexão

2275

MPa

ASTM D 790

Resistência à flexão

89.6

MPa

ASTM D 790

Impacto Izod com entalhe, 1/8 in

641

J/m

ASTM D 256

Propriedades térmicas

Valor

Unidade

Método de ensaio

ASTM Dados

UL94 flamabilidade

V-0

UL 94

Espessuras do tubo de teste

1.59

DTUL @ 66 psi

132

°C

ASTM D 648

DTUL @ 264 psi

127

°C

ASTM D 648

Outras propriedades	Valor	Unidade	Método de ensaio
Absorção de água, 24hr	0.15	%	ASTM D 570
Densidade	1210	kg/m³	ASTM D 792
Moisture Content	0.02	%	-

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	121	°C	-
Pré-secagem - tempo	4	h	-
Temperatura da massa	288 - 316	°C	-
Temperatura do molde	82.2 - 121	°C	-
Pressão de injeção	68.9 - 103	MPa	-

Características

Processamento

Moldagem por injeção

Características especiais

Retardante de chama

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.