Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Neostar™ Elastomer FN005 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Neostar™ Elastomer FN005:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Neostar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades - Propriedades do filme
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05.




Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 20 g/10min ASTM D 1238
Temperatura 230 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 170 MPa ASTM D 638
Resistência à tração no escoamento 14 MPa ASTM D 638
Resistência à tração na ruptura 20 MPa ASTM D 638
Alongamento no escoamento 30 % ASTM D 638
Deformação na ruptura 300 % ASTM D 638
Módulo de flexão 150 MPa ASTM D 790
Dureza Shore A 95 - ASTM D 2240
Dureza Shore D 55 - ASTM D 2240
Impacto Izod com entalhe, baixa temperatura 50 J/m ASTM D 256
Temperatura -40 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
Coeficiente de expansão térmica, long. 150 E-6/K ASTM D 696
Temperatura de fusão 207 °C ASTM D 3418
Temp. de transição vítrea -40 °C ASTM E 1356
Temperatura de amolecimento Vicat 170 °C ASTM D 1525
Condutividade térmica, estado sólido 0.0274 W/(m K) ASTM C 177
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 80 - ASTM D 2457
Haze 1 % ASTM D 1003
Transmitância luminosa 93 % ASTM D 1003
Índice de refração 1.51 - ASTM D 542
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 0.35 % ASTM D 570
Densidade 1130 kg/m³ ASTM D 792
Propriedades do filmeValorUnidadeMétodo de ensaio
ASTM Data
Módulo de tração, long. 185 MPa ASTM D 882
Módulo de tração, trans. 179 MPa ASTM D 882
Resistência à tração no escoamento, long. 13.7 MPa ASTM D 882
Resistência à tração no escoamento, trans. 13.5 MPa ASTM D 882
Resistência à tração na ruptura, long. 23.7 MPa ASTM D 882
Resistência à tração na ruptura, trans. 22.6 MPa ASTM D 882
Alongamento no escoamento, long. 26 % ASTM D 882
Alongamento no escoamento, trans. 26 % ASTM D 882
Deformação na ruptura, long. 550 % ASTM D 882
Deformação na ruptura, trans. 550 % ASTM D 882
Espessura de corpo de prova 0.13 mm -
Características
Processamento
Moldagem por injeção, Extrusão de laminas, Extrusão de tubos, Extrusão de perfis
Características especiais
Estável contra o calor, Transparente
Características
Copolímero
Resistência Química
Resistência química geral
Aplicaciones
Automóvel, Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.