Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of DOWLEX™ 2344 - PE - The Dow Chemical Company

Material Data Center offers the following functions for DOWLEX™ 2344:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Dowlex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 0.7 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 580 MPa ISO 527
Tensão no escoamento 16.5 MPa ISO 527
Deformação no escoamento 13 % ISO 527
Tensão na ruptura 34 MPa ISO 527
Deformação na ruptura 800 % ISO 527
Módulo de flexão, 23°C 550 MPa ISO 178
Dureza Shore D 53 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Coef. de expansão térmica linear, paralelo 200 E-6/K ISO 11359-1/-2
ASTM Dados
Temperatura de amolecimento Vicat 122 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 933 kg/m³ ASTM D 792
Características
Processamento
Outros tipos de extrusão
Forma de entrega
Granulos, Branco
Características
Baixo odor, Copolímero, Copolímero octeno
Resistência Química
Resistência ao stress cracking
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR, Contato com água potável, Contato com água potável NSF 61
Aplicaciones
Construção
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.