Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 300TE BK602 - POM - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 300TE is a toughened medium-high viscosity acetal homopolymer for injection molding with very low VOC emissions for applications in automotive interiors.

Características de processamento/físicas	Valor	Unidade	Método de ensaio
ISO Dados
Contração após a moldagem, paralelo	1.3	%	ISO 294-4, 2577
Contração após a moldagem, perpendicular	1.5	%	ISO 294-4, 2577

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	2000	MPa	ISO 527
Tensão no escoamento	54	MPa	ISO 527
Deformação no escoamento	20	%	ISO 527
Deformação nominal na ruptura	35	%	ISO 527
Res. impacto Charpy c/entalhe, +23°C	15	kJ/m²	ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C	8	kJ/m²	ISO 179/1eA

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa	78	°C	ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa	136	°C	ISO 75-1/-2
Coef. de expansão térmica linear, paralelo	110	E-6/K	ISO 11359-1/-2
Coef. de expansão térmica linear, perpend.	120	E-6/K	ISO 11359-1/-2

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1370	kg/m³	ISO 1183

Diagrama

Características

Processamento

Moldagem por injeção, Extrusão de perfis, Extrusão de chapas, Outros tipos de extrusão

Forma de entrega

Granulos, Negro

Aditivos

Lubrificantes, Desmoldante

Características especiais

Alto impacto.

Características

Low Emission, Homopolímero

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.