Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® 300TE BK602 - POM - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® 300TE is a toughened medium-high viscosity acetal homopolymer for injection molding with very low VOC emissions for applications in automotive interiors.

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
성형 수축률, 평행	1.3	%	ISO 294-4, 2577
성형 수축률, 수직	1.5	%	ISO 294-4, 2577

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2000	MPa	ISO 527
항복강도	54	MPa	ISO 527
항복변형률	20	%	ISO 527
파단시 평균신율	35	%	ISO 527
챠피 노치드 충격 강도, +23°C	15	kJ/m²	ISO 179/1eA
챠피 노치드 충격 강도, -30°C	8	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa	78	°C	ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa	136	°C	ISO 75-1/-2
선형 열팽창 계수, 평행	110	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	120	E-6/K	ISO 11359-1/-2

기타 특성	값	단위	시험규격
밀도	1370	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형, 외형 압출, 시트 압출, 기타 압출

인도 유형

펠렛 (입자,알갱이), 검정

부가물

윤활제, 이형제

특별 특성

고충격 또는 고충격 보강

특성

Low Emission, Homopolymer

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.