Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Delrin® RA100CPE NC010 - POM - DuPont Engineering Polymers

Check here, which other Delrin datasheets, application examples or technical articles are available in Material Data Center

Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades.

Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries.

Delrin® RA100CPE is a high viscosity acetal homopolymer for use in easy-to-fill moulds with very low VOC emissions, reduced lifecycle greenhouse gas emissions and lower fossil resource use. Delrin® RA100CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.

Delrin® Renewable Attributed base polymer is produced from 100% bio-feedstock from waste*. 100% certified renewable electricity is used for its production.
This approach helps customers in achieving their sustainability goals.

* according to ISCC Plus mass balance certification.

Características de processamento/físicas	Valor	Unidade	Método de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR	1.9	cm³/10min	ISO 1133
Temperatura	190	°C	-
Carga	2.16	kg	-
Contração após a moldagem, paralelo	2.2	%	ISO 294-4, 2577
Contração após a moldagem, perpendicular	1.9	%	ISO 294-4, 2577

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	2900	MPa	ISO 527
Tensão no escoamento	71	MPa	ISO 527
Deformação no escoamento	28	%	ISO 527
Deformação nominal na ruptura	45	%	ISO 527
Resistência ao impacto Charpy , +23°C	N	kJ/m²	ISO 179/1eU
Resistência ao impacto Charpy, -30°C	450	kJ/m²	ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C	16	kJ/m²	ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C	13	kJ/m²	ISO 179/1eA

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Temperatura de fusão, 10°C/min	178	°C	ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa	95	°C	ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa	160	°C	ISO 75-1/-2
Coef. de expansão térmica linear, paralelo	110	E-6/K	ISO 11359-1/-2
Coef. de expansão térmica linear, perpend.	100	E-6/K	ISO 11359-1/-2
Flamabilidade a 1.5mm esp. nom.	HB	class	IEC 60695-11-10
Espessuras do tubo de teste	1.5	mm	-
Cartão Amarelo (yellow card) disponível	sim	-	-
Flamabilidade a espessura h	HB	class	IEC 60695-11-10
Espessuras do tubo de teste	0.8	mm	-
Cartão Amarelo (yellow card) disponível	sim	-	-

Propriedades elétricas	Valor	Unidade	Método de ensaio
ISO Dados
Constante dielétrica, 100Hz	4.1	-	IEC 62631-2-1
Constante dielétrica, 1MHz	4	-	IEC 62631-2-1
Fator de dissipação dielétrica, 100Hz	25	E-4	IEC 62631-2-1
Fator de dissipação dielétrica, 1MHz	45	E-4	IEC 62631-2-1
Resistividade volumétrica específica	>1E13	Ohm*m	IEC 62631-3-1
Resistividade superficial específica	6E14	Ohm	IEC 62631-3-2
Índice comparativo de linha de fuga	600	-	IEC 60112

Outras propriedades	Valor	Unidade	Método de ensaio
Absorção de água	1	%	Sim. to ISO 62
Absorção de umidade	0.1	%	Sim. to ISO 62
Densidade	1420	kg/m³	ISO 1183

Diagrama

Características

Processamento

Moldagem por injeção, Extrusão de perfis, Extrusão de chapas, Outros tipos de extrusão

Forma de entrega

Granulos, Cor natural

Características

Low Emission, Estabilidade térmica, Homopolímero

Certifications

Contém recursos renováveis, ISCC Plus

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Outras informações

Moldagem por injeção

Drying is recommended, but not necessary for newly opened packaging stored in a dry location.

Follow the drying guidelines above in the following cases:

·         If moisture is above the Processing Moisture Content recommendation,

·         When a resin container is damaged,

·         When the material is not properly stored in a dry place at room temperature, or

·         When packaging stays open for a significant time.
 

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.