Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Neostar™ Elastomer FN005 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Neostar™ Elastomer FN005:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Neostar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Eastman Neostar™ Elastomer FN005 is a tough, clear, durable, general purpose grade copolyester ether. It was designed for use in the profile and automotive markets, but is also used in packaging and tubing applications where toughness and flex-crack resistance are required. Eastman Neostar™ Elastomer FN005 can be used in injection molding and cast film or tubing extrusion applications or in any application that demands strength, durability, and puncture resistance in harsh environments. This copolyester combines toughness, clarity, and flexibility without the addition of plasticizers. Eastman Neostar™ Elastomer FN005 is considered environmentally preferred because of its non-halogenated material composition. The target inherent viscosity of this product is 1.05.




Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 20 g/10min ASTM D 1238
온도 230 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ASTM 데이터
인장탄성률 170 MPa ASTM D 638
항복강도 14 MPa ASTM D 638
파단시 강도 20 MPa ASTM D 638
항복변형률 30 % ASTM D 638
파단시 신율 300 % ASTM D 638
굴곡 계수 150 MPa ASTM D 790
쇼어 A 경도 95 - ASTM D 2240
쇼어 D 경도 55 - ASTM D 2240
아이조드 충격은 노치, Low-Temperature 50 J/m ASTM D 256
온도 -40 °C -
열적 특성값단위시험규격
ASTM 데이터
열팽창 계수, 평행 150 E-6/K ASTM D 696
녹는점 207 °C ASTM D 3418
유리 전이 온도 -40 °C ASTM E 1356
비카트 연화 온도 170 °C ASTM D 1525
열전도율, 솔리드 0.0274 W/(m K) ASTM C 177
광학 특성값단위시험규격
ASTM 데이터
광택도 80 - ASTM D 2457
탁도 1 % ASTM D 1003
광선 투겠淅 93 % ASTM D 1003
굴절 지수 1.51 - ASTM D 542
기타 특성값단위시험규격
물에서의 흡수성, 24hr 0.35 % ASTM D 570
밀도 1130 kg/m³ ASTM D 792
기계적 성질 (필름) 값단위시험규격
ASTM Data
인장탄성률, 평행 185 MPa ASTM D 882
인장탄성률, 수직 179 MPa ASTM D 882
항복강도, 평행 13.7 MPa ASTM D 882
항복강도, 수직 13.5 MPa ASTM D 882
파단시 강도, 평행 23.7 MPa ASTM D 882
파단시 강도, 수직 22.6 MPa ASTM D 882
항복변형률, 평행 26 % ASTM D 882
항복변형률, 수직 26 % ASTM D 882
파단시 신율 , 평행 550 % ASTM D 882
파단시 신율 , 수직 550 % ASTM D 882
시편두께 0.13 mm -
특징
생산 공정
사출 성형, 필름 압출, Pipe/Tube Extrusion, 외형 압출
특별 특성
열안정성, 투명도
특성
Copolymer
내화학성에
General Chemical Resistance
응용
자동차의, 포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.