Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ISO 데이터 |
용융 부피 - 흐름 속도, MVR |
18 |
cm³/10min |
ISO 1133 |
온도 |
190 |
°C |
- |
하중 |
2.16 |
kg |
- |
Other Standards[S] |
성형 수축률, 평행 |
3.0 |
% |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
기계적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
쇼어 A 경도 |
88 |
- |
ISO 7619-1 |
Other Standards[S] |
굴곡 계수, 23°C |
27 |
MPa |
ISO 6721-1 |
굴곡 계수 |
72 |
MPa |
ISO 6721-1 |
굴곡 계수-温度 |
60 |
°C |
- |
S: | These properties are reported by the producer according standards that are different to our defaults. |
열적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
녹는점, 10°C/min |
160 |
°C |
ISO 11357-1/-3 |
비카트 연화 온도, A |
90 |
°C |
ISO 306 |
Other Standards[S] |
유리 전이 온도, 10 °C/min |
-13.6 |
°C |
ISO 6721-1 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 |
1200 |
kg/m³ |
ISO 1183 |
Bulk density |
457 |
kg/m³ |
- |
3D Data | 값 | 단위 | 시험규격 |
Other Standards[S] |
인장 강도, flat |
20[1] |
MPa |
DIN 53504 |
인장 강도, upright |
15[2] |
MPa |
DIN 53504 |
파단시 신율 , flat |
520[1] |
% |
DIN 53504 |
파단시 신율 , upright |
500[2] |
% |
DIN 53504 |
1: | XY-direction | 2: | ZX-direction | S: | These properties are reported by the producer according standards that are different to our defaults. |
특징
생산 공정
Additive Manufacturing, Laser Sintering
인도 유형
가루, 화이트
응용
스포츠 장비
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com