Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VALOX™ FR Resin ENH8530 - Europe - (PBT+PET)-GF15 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for VALOX™ FR Resin ENH8530 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Valox datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
VALOX ENH8530 is a 15% glass reinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate/Polyethylene Terephthalate (PBT/PET) injection moldable grade with excellent chemical resistance. It has a UL94V0@1.5mm and 5VA@2.0mm flame rating. This is a good candidate for a variety of applications needing a sustainable FR PBT/PET solution.

UL Yellow Card Link E45329-100700420
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 45 cm³/10min ISO 1133
온도 265 °C -
하중 5 kg -
용융 흐름성, MFI 15 g/10min ISO 1133
온도 250 °C -
负荷 5 kg -
ASTM 데이터
용융 흐름성, MFI 20 g/10min ASTM D 1238
온도 265 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 7400 MPa ISO 527
항복강도 75 MPa ISO 527
항복변형률 2 % ISO 527
파단시 강도 75 MPa ISO 527
파단시 신율 2 % ISO 527
굴곡 계수 6300 MPa ISO 178
Izod impact strength, +23°C, 4mm 22 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 20 kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 5 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 5 kJ/m² ISO 180/1A
로크웰 경도 R 120 - ISO 2039-2
Ball indentation hardness 142 MPa ISO 2039-1
ASTM 데이터
인장탄성률 7200 MPa ASTM D 638
항복강도 75 MPa ASTM D 638
파단시 강도 75 MPa ASTM D 638
항복변형률 2 % ASTM D 638
파단시 신율 2 % ASTM D 638
굴곡 계수 6000 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 45 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 45 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in 330 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 180 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 215 °C ISO 75-1/-2
비카트 연화 온도, A 215 °C ISO 306
비카트 연화 온도, B 196 °C ISO 306
비카트 연화 온도, 120°C/h 50N 200 °C ISO 306
1.5mm 평균두께에서의 난연성 V-0 class IEC 60695-11-10
테스트 두께 1.5 mm -
두께가 h인 제품의 난연성 등급 5V 5VA class IEC 60695-11-20
테스트 두께 2.0 mm -
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
Glow Wire Ignition Temperature (GWIT) 800 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 mm -
ASTM 데이터
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 190 °C ASTM D 648
비카트 연화 온도 202 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 3.3 - IEC 62631-2-1
소산 인자, 1MHz 100 E-4 IEC 62631-2-1
부피 저항 1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
전기 압력 38 kV/mm IEC 60243-1
CTI 400 - IEC 60112
ASTM 데이터
전기 압력, 단기간의 19 kV/mm ASTM D 149
소산 인자, 1 MHz 0.01 - ASTM D 150
상대 유전율, 1 MHz 3.3 - ASTM D 150
부피 저항 1E15 Ohm*cm ASTM D 257
기타 특성값단위시험규격
밀도 1460 kg/m³ ISO 1183
밀도 1460 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 110 - 120 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
용융수지온도 260 - 285 °C -
성형온도 60 - 110 °C -
Feed temperature 40 - 60 °C -
Zone 1 240 - 260 °C -
Zone 2 255 - 280 °C -
Zone 3 260 - 280 °C -
특징
생산 공정
사출 성형
부가물
난연제
특별 특성
난연성
내화학성에
General Chemical Resistance
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.