Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Staramide AG6ST01 - PA66-GF - Eurostar Engineering Plastics

Material Data Center offers the following functions for Staramide AG6ST01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Staramide datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 7400 MPa ISO 527
파단시 강도 130 MPa ISO 527
파단시 신율 4 % ISO 527
아이조드 충격은 노치, +23°C 12 kJ/m² ISO 180/1A
아이조드 충격은 노치 8 kJ/m² ISO 180/1A
온도 -20 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 235 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 245 °C ISO 75-1/-2
선형 열팽창 계수, 평행 27 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 78 E-6/K ISO 11359-1/-2
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.6 mm -
기타 특성값단위시험규격
밀도 1360 kg/m³ ISO 1183
특징
생산 공정
사출 성형, 기타 압출
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강
특성
Low Odor
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.