Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® PPcompound G3220A - PP - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® PPcompound G3220A:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
SABIC® PPcompound G3220A is a 20% short glass fiber reinforced Polypropylene for under-the-hood and structural applications. The base material is a PP homopolymer. The glass fibres are chemically coupled to the PP matrix. This material has been designed to combine a good performance profile with fast processing. SABIC® PPcompound G3220A is a designated automotive grade. IMDS ID: 209767996
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 4900 MPa ISO 527
파단시 강도 80 MPa ISO 527
파단시 신율 3.3 % ISO 527
굴곡 계수, 23°C 4500 MPa ISO 178
챠피 노치드 충격 강도, +23°C 10 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 9 kJ/m² ISO 179/1eA
ASTM 데이터
인장탄성률 5380 MPa ASTM D 638
파단시 강도 87 MPa ASTM D 638
파단시 신율 3.3 % ASTM D 638
굴곡 계수 4210 MPa ASTM D 790
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 150 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 161 °C ISO 75-1/-2
비카트 연화 온도, A 163 °C ISO 306
ASTM 데이터
DTUL @ 66 psi 160 °C ASTM D 648
DTUL @ 264 psi 151 °C ASTM D 648
기타 특성값단위시험규격
밀도 1040 kg/m³ ISO 1183
밀도 1050 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 80 - 100 °C -
Pre-drying - Time 2 - 4 h -
용융수지온도 210 - 270 °C -
성형온도 15 - 60 °C -
Zone 1 190 - 230 °C -
Zone 2 200 - 250 °C -
Zone 3 210 - 270 °C -
Nozzle temperature 210 - 270 °C -
Back pressure 1 - 1.5 MPa -
특징
특성
Homopolymer
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.