Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 118P - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 118P:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
열적 특성 - 광학 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서
SABIC® LLDPE 118P is a butene linear low density polyethylene resin typically used for food applications. It contains an antioxidant inspired by nature offering advantages versus conventional stabilizers: - Produced with no phosphorus or sulphur based additives - Improved processing stability at a much reduced concentration - No Specific Migration Limit (SML free) Films produced from this resin typically have good puncture resistance, high tensile strength, good hot tack properties and low gel levels. Typical applications for SABIC® LLDPE 118P are (frozen) food bags and lamination films. Film properties. Film of 50 ?m and BUR=2 has been produced on Kiefel IBC with 140 kg/h. Die size 200 mm, die gap 2,7 mm. This product is not intended for and must not be used in any pharmaceutical/medical applications.
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 121 °C ISO 11357-1/-3
비카트 연화 온도, A 103 °C ISO 306
광학 특성값단위시험규격
ASTM 데이터
탁도 13 % ASTM D 1003
기계적 성질 (필름) 값단위시험규격
ISO 데이터
인장탄성률, 평행 190 MPa ISO 527-3
인장탄성률, 수직 210 MPa ISO 527-3
항복시의 강도, 평행 11 MPa ISO 527-3
항복시의 강도, normal 12 MPa ISO 527-3
파단시 강도, 평행 44 MPa ISO 527-3
파단시 강도, 수직 33 MPa ISO 527-3
트라우저 전단강도, 평행 40 N/mm ISO 6383-1
트라우저 전단강도, 수직 140 N/mm ISO 6383-1
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.