Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsamid® AZM 23 BLACK T6LD - PA12-GF23 - ARKEMA

Material Data Center offers the following functions for Rilsamid® AZM 23 BLACK T6LD:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Rilsamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
ISO 16396 - PA12, GF23, M1GHLR, 16-060

Rilsamid® AZM 23 BLACK T6LD resin is a fiberglass reinforced polyamide. 
This black colored grade is designed for injection moulding.


Packaging: 
This grade is delivered dried in sealed packaging (25 kg bags / 450 kg rigid containers) ready to be processed

Shelf life: 
Two years from the delivery.
For any use above this limit please refer to our technical services. 
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 13 / * cm³/10min ISO 1133
온도 235 / * °C -
하중 5 / * kg -
성형 수축률, 평행 0.2 / * % ISO 294-4, 2577
성형 수축률, 수직 0.4 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 5500 / 5070 MPa ISO 527
항복강도 101 / 105 MPa ISO 527
항복변형률 3 / 3.5 % ISO 527
파단시 평균신율 5 / 5.2 % ISO 527
챠피 충격 강도 , +23°C 66 / 77 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 66 / 83 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 15 / 19 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 8 / 12 kJ/m² ISO 179/1eA
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 179 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 165 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 173 / * °C ISO 75-1/-2
비카트 연화 온도, B 165 / * °C ISO 306
선형 열팽창 계수, 평행 60 / * E-6/K ISO 11359-1/-2
전기적 특성건조/응축단위시험규격
ISO 데이터
상대 유전율, 100Hz 5 / - - IEC 62631-2-1
상대 유전뮬, 1MHz 5 / - - IEC 62631-2-1
소산 인자, 100Hz 1170 / - E-4 IEC 62631-2-1
소산 인자, 1MHz 364 / - E-4 IEC 62631-2-1
기타 특성건조/응축단위시험규격
물에서의 흡수성 1.3 / * % ISO 62와 유사
조건에서의 흡습성 0.5 / * % ISO 62와 유사
밀도 1180 / 1170 kg/m³ ISO 1183
도표
점도-변형률 , Rilsamid® AZM 23 BLACK T6LD, PA12-GF23, ARKEMA
전단-변형률 , Rilsamid® AZM 23 BLACK T6LD, PA12-GF23, ARKEMA
동전단탄성율-온도 , Rilsamid® AZM 23 BLACK T6LD (건조), PA12-GF23, ARKEMA
응력-신율 , Rilsamid® AZM 23 BLACK T6LD (건조), PA12-GF23, ARKEMA
시컨트탄성율-신율 , Rilsamid® AZM 23 BLACK T6LD (건조), PA12-GF23, ARKEMA
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 검정
부가물
이형제
특별 특성
가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성
지역별 검색
기타 정보
사E성

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 250°C / 265°C / 280°C.
- Typical mold temperature : 40 – 90°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.

화학적 매체에 대한 저항력
에서의 아세트산 (질량 5%) (23°C)
23 °C에서의 시트르산 용액 (질량 10%) (23°C)
23 °C에서의 락트산 (질량 10%) (23°C)
에서의 염산 (질량 36%) (23°C)
23 °C에서의 질산 (질량 40%) (23°C)
에서의 황산 (질량 38%) (23°C)
에서의 황산 (질량 5%) (23°C)
에서의 크롬산 용액 (질량 40%) (23°C)
염기
에서의 수산화나트륨 용액 (질량 35%) (23°C)
에서의 수산화나트륨 용액 (질량 1%) (23°C)
에서의 수산화암모늄 용액 (질량 10%) (23°C)
알코올
23 °C에서의 메탄올 (23°C)
23 °C에서의 에탄올 (23°C)
탄화수소
에서의 n-헥산 (23°C)
에서의 톨루엔 (23°C)
케톤
에서의 아세톤 (23°C)
광유
에서의 SAE 10W40 멀티그레이드 모터 오일 (23°C)
에서의 SAE 10W40 멀티그레이드 모터 오일 (130°C)
에서의 SAE 80/90 하이포이드 기어 오일 (130°C)
에서의 절연유 (23°C)
표준 연료
에서의 ISO 1817 액체 1 (60°C)
에서의 ISO 1817 액체 2 (60°C)
60 °C에서의 ISO 1817 액체 3 (60°C)
에서의 ISO 1817 액체 4 (60°C)
에서의 무알코올 표준 연료 (ISO 1817 액체 C 참조) (23°C)
에서의 알코올성 표준 연료 (ISO 1817 액체 4 참조) (23°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (23°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (90°C)
에서의 디젤 연료 (ISO 1817 액체 F 참조) (>90°C)
염액
에서의 염화나트륨 용액 (질량 10%) (23°C)
에서의 차아염소산나트륨 용액 (질량 10%) (23°C)
에서의 염화아연 용액 (질량 50%) (23°C)
기타
에서의 초산 에틸 (23°C)
에서의 과산화수소 (23°C)
에서의 DOT No. 4 브레이크 오일 (130°C)
에서의 에틸렌 글리콜 수용액 (질량 50%) (108°C)
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.