Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of POLYFLAM® RPP 373 - PP-T - LyondellBasell Industries

Material Data Center offers the following functions for POLYFLAM® RPP 373:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polyflam datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
기계적 특성단위시험규격
ASTM 데이터
항복강도 15 MPa ASTM D 638
파단시 신율 4 % ASTM D 638
굴곡 계수 1400 MPa ASTM D 790
로크웰 경도 R13 - ASTM D 785
아이조드 충격은 노치, 1/8 in 336 J/m ASTM D 256
열적 특성단위시험규격
ASTM 데이터
UL94 난연성 V-0 - UL 94
테스트 두께 3.05 mm -
DTUL @ 66 psi 100 °C ASTM D 648
DTUL @ 264 psi 52 °C ASTM D 648
기타 특성단위시험규격
밀도 1370 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
특별 특성
난연성, U.V. 안정성 또는 기후 안정성
특성
Homopolymer
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.