Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Plexiglas® V052 - PMMA - Altuglas International

Material Data Center offers the following functions for Plexiglas® V052:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Plexiglas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ASTM 데이터
용융 흐름성, MFI 2.8 g/10min ASTM D 1238
온도 230 °C -
하중 3.8 kg -
성형 수축률, 평행 0.004 mm/mm ASTM D 955
기계적 특성단위시험규격
ASTM 데이터
인장탄성률 3103 MPa ASTM D 638
파단시 신율 6 % ASTM D 638
굴곡 계수 3103 MPa ASTM D 790
로크웰 경도 M 91 - ASTM D 785
아이조드 충격은 노치, 1/8 in 16 J/m ASTM D 256
열적 특성단위시험규격
ASTM 데이터
비카트 연화 온도 97.2 °C ASTM D 1525
광학 특성단위시험규격
ASTM 데이터
탁도 2 % ASTM D 1003
광선 투겠淅 92 % ASTM D 1003
굴절 지수 1.49 - ASTM D 542
기타 특성단위시험규격
물에서의 흡수성, 24hr 0.3 % ASTM D 570
밀도 1190 kg/m³ ASTM D 792
특징
특별 특성
투명도
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.