Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin CN5260 - Asia - (PPE+PS)-(MX+GF)50 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin CN5260 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL CN5260 resin is a 50% mineral and glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high modulus, injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VB at 2mm and V1 at 1.5mm. NORYL CN5260 resin exhibits good dimensional stability, low moisture absorption, and high rigidity. It is an excellent candidate for printer chassis applications.

UL Yellow Card Link: E207780-228542
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 13.3 g/10min ASTM D 1238
온도 300 °C -
하중 5 kg -
성형 수축률, 평행 0.002 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
굴곡 계수 12350 MPa ASTM D 790
굴곡 강도 161 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 58 J/m ASTM D 256
Other Standards[S]
항복강도 129 MPa Producer Method
파단시 신율 5 % Producer Method
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ISO 데이터
1.5mm 평균두께에서의 난연성 V-1 class IEC 60695-11-10
테스트 두께 1.5 mm -
Yellow Card 유효한 예 - -
두께가 h인 제품의 난연성 등급 5V 5VB class IEC 60695-11-20
테스트 두께 2.0 mm -
Yellow Card 유효한 예 - -
ASTM 데이터
UL94 난연성 V-1 - UL 94
테스트 두께 1.5 mm -
DTUL @ 264 psi 125 °C ASTM D 648
기타 특성값단위시험규격
물에서의 흡수성, 24hr 0.06 % ASTM D 570
밀도 1530 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 100 °C -
Pre-drying - Time 3 - 4 h -
용융수지온도 280 - 300 °C -
성형온도 70 - 90 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 290 °C -
Zone 3 280 - 300 °C -
Nozzle temperature 280 - 300 °C -
Back pressure 0.5 - 1.2 MPa -
특징
생산 공정
사출 성형
부가물
난연제
특별 특성
난연성, Halogen-free
응용
IT / 비즈니스 기계, 전기 및 전자
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.