Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
Other Standards[S] |
성형 수축률, 평행 |
0.4 |
% |
DIN 16901 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기계적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
인장탄성률 |
3000 |
MPa |
ISO 527 |
인장 강도 |
67 |
MPa |
ISO 527 |
챠피 충격 강도, +23°C |
74 |
kJ/m² |
ISO 179/1eU |
열적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
하중하에서의 변형온도, 1.80 MPa |
90 |
°C |
ISO 75-1/-2 |
Other Standards[S] |
선형 열팽창 계수, 평행 |
5 |
E-6/K |
DIN 53752 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
전기적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
표면 저항 |
1E12 |
Ohm |
IEC 62631-3-2 |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 |
1200 |
kg/m³ |
ISO 1183 |
Processing Recommendation Extrusion | 값 | 단위 | 시험규격 |
Pre-drying - Temperature |
130 |
°C |
- |
Pre-drying - Time |
6 - 8 |
h |
- |
용융수지온도 |
280 |
°C |
- |
Zone 1 |
260 - 300 |
°C |
- |
Zone 2 |
260 - 300 |
°C |
- |
Zone 3 |
260 - 300 |
°C |
- |
Nozzle temperature |
250 - 290 |
°C |
- |
특징
생산 공정
기타 압출, Additive Manufacturing
인도 유형
펠렛 (입자,알갱이), 검정
특별 특성
열안정성
응용
자동차의, Filament for 3D Printing
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com