Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ASTM 데이터 |
용융 흐름성, MFI |
2 |
g/10min |
ASTM D 1238 |
온도 |
190 |
°C |
- |
하중 |
2.16 |
kg |
- |
기계적 특성 | 값 | 단위 | 시험규격 |
Other Standards[S] |
최대 관통힘, +23°C |
25 |
N |
ASTM D 5748 |
관통 에너지, +23°C |
1.6 |
J |
ASTM D 5748 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
열적 특성 | 값 | 단위 | 시험규격 |
ASTM 데이터 |
녹는점 |
121 |
°C |
ASTM D 3418 |
비카트 연화 온도 |
100 |
°C |
ASTM D 1525 |
광학 특성 | 값 | 단위 | 시험규격 |
ASTM 데이터 |
광택도 |
92 |
- |
ASTM D 2457 |
탁도 |
1.8 |
% |
ASTM D 1003 |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 |
918 |
kg/m³ |
ASTM D 792 |
기계적 성질 (필름) | 값 | 단위 | 시험규격 |
ASTM Data |
항복강도, 평행 |
9.7 |
MPa |
ASTM D 882 |
항복강도, 수직 |
9.6 |
MPa |
ASTM D 882 |
파단시 강도, 평행 |
37 |
MPa |
ASTM D 882 |
파단시 강도, 수직 |
23 |
MPa |
ASTM D 882 |
파단시 신율 , 평행 |
330 |
% |
ASTM D 882 |
파단시 신율 , 수직 |
670 |
% |
ASTM D 882 |
압출 유형 |
cast |
- |
- |
시편두께 |
0.02 |
mm |
- |
Processing Recommendation Extrusion | 값 | 단위 | 시험규격 |
용융수지온도 |
220 - 250 |
°C |
- |
Zone 1 |
180 - 270 |
°C |
- |
특징
생산 공정
필름 압출
특성
Blending Resin, Thermal Stability
Certifications
Food contact
응용
포장
지역별 검색
쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com