Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer CXT19EX - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer CXT19EX - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
LEXAN™ CXT19EX resin is a High Heat Polycarbonate Copolymer Resin with Vicat of 190°C and crystal clear transparency. This resin is optimized for sheet and film extrusion applications, has a low plateout and a broad processing window with limited yellowing. It is available in limited transparent colors.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 13 cm³/10min ISO 1133
온도 330 °C -
하중 2.16 kg -
ASTM 데이터
용융 흐름성, MFI 15 g/10min ASTM D 1238
온도 330 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2500 MPa ISO 527
항복강도 80 MPa ISO 527
항복변형률 7.5 % ISO 527
파단시 강도 65 MPa ISO 527
파단시 신율 25 % ISO 527
굴곡 계수 2550 MPa ISO 178
챠피 충격 강도, +23°C, 3mm N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C, 3mm 9 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C, 3mm 7 kJ/m² ISO 179/1eA
Izod충격강도, +23°C N kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 3mm 8 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 3mm 6 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 2600 MPa ASTM D 638
항복강도 80 MPa ASTM D 638
파단시 강도 65 MPa ASTM D 638
항복변형률 7.5 % ASTM D 638
파단시 신율 25 % ASTM D 638
굴곡 계수 2600 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 80 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 70 J/m ASTM D 256
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 172 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 187 °C ISO 75-1/-2
비카트 연화 온도, 120°C/h 50N 192 °C ISO 306
열전도율 0.2 W/(m K) DIN 52616
ASTM 데이터
DTUL @ 66 psi 187 °C ASTM D 648
DTUL @ 264 psi 172 °C ASTM D 648
기타 특성값단위시험규격
물에서의 흡수성 0.5 % ISO 62와 유사
조건에서의 흡습성 0.3 % ISO 62와 유사
밀도 1220 kg/m³ ISO 1183
밀도 1220 kg/m³ ASTM D 792
특징
특별 특성
투명도
응용
자동차의
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.