Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Haiplen H30 G10 BA - PP-GF50 - Taro Plast S.p.A.

Material Data Center offers the following functions for Haiplen H30 G10 BA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Haiplen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 4 g/10min ISO 1133
온도 230 °C -
负荷 2.16 kg -
기계적 특성단위시험규격
ISO 데이터
파단시 강도 85 MPa ISO 527
파단시 신율 3 % ISO 527
굴곡 계수, 23°C 7400 MPa ISO 178
ASTM 데이터
아이조드 충격은 노치, 1/8 in 125 J/m ASTM D 256
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 150 °C ISO 75-1/-2
비카트 연화 온도, A 165 °C ISO 306
비카트 연화 온도, B 145 °C ISO 306
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 3.2 mm -
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.6 mm -
산소지수 21 % ASTM D 2863
기타 특성단위시험규격
물에서의 흡수성 0.1 % ISO 62와 유사
밀도 1340 kg/m³ ISO 1183
특징
인도 유형
펠렛 (입자,알갱이)
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성
특성
Laser Markable, Low Odor, Homopolymer
응용
자동차의, 전기 및 전자
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.