Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory G 16 natural - PA6I/6T - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grivory G 16 natural:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Product-nomenclature: ISO 16396-PA6I/6T,,FT,S09-030

 

Co Polyamide

Partially aromatic Polyamide

Product Attributes

  Highly transparent, Barrier material, Improved UV resistance (outdoor use)

Markets

  Packaging
  Paper coating, Cosmetics / Personal care

Approvals

  Food Contact
  EU Requirements, FDA
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 100 / * cm³/10min ISO 1133
온도 275 / * °C -
하중 5 / * kg -
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 3000 / 3000 MPa ISO 527
항복강도 100 / 100 MPa ISO 527
항복변형률 5 / 5 % ISO 527
파단시 평균신율 >50 / >50 % ISO 527
챠피 노치드 충격 강도, +23°C 8 / 8 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 8 / 2 kJ/m² ISO 179/1eA
열적 특성건조/응축단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 125 / * °C ISO 11357-1/-2
광학 특성건조/응축단위시험규격
ISO Data
광택도, 60° 160 / * - ISO 2813
기타 특성건조/응축단위시험규격
물에서의 흡수성 7 / * % ISO 62와 유사
조건에서의 흡습성 2 / * % ISO 62와 유사
밀도 1180 / - kg/m³ ISO 1183
기계적 성질 (필름) 건조/응축단위시험규격
ISO 데이터
항복시의 강도, 평행 85 / * MPa ISO 527-3
항복시의 강도, 수직 85 / * MPa ISO 527-3
항복시의 변형율, 평행 5 / * % ISO 527-3
항복시의 변형율, 수직 5 / * % ISO 527-3
최대변형율, 평행 200 / * % ISO 527-3
최대변형율, 수직 200 / * % ISO 527-3
엘멘도프 전단강도, 평행 10 / * N ISO 6383-2
엘멘도프 전단강도, 수직 10 / * N ISO 6383-2
트라우저 전단강도, 평행 5 / * N/mm ISO 6383-1
트라우저 전단강도, 수직 5 / * N/mm ISO 6383-1
수증기 투과속도, 23°C/85%RH 7 / * g/(m²*d) ISO 15106-1/-2
산소 투과율, 23°C/0%r.h. 30 / * cm³/(m²*d*bar) ISO 15105-1/-2
산소 투과율, 23°C/85%RH 10 / * cm³/(m²*d*bar) ISO 15105-1/-2
이산화탄소 투과율, 23°C/0%r.h. 90 / * cm³/(m²*d*bar) ISO 15105-1/-2
이산화탄소 투과율, 23°C/85%RH 40 / * cm³/(m²*d*bar) ISO 15105-1/-2
특징
생산 공정
사출 성형, 필름 압출, 코팅, 중공 성형
인도 유형
과립, 자연 색상
특별 특성
U.V. 안정성 또는 기후 안정성, 투명도
특성
Barrier Properties, Copolymer
Certifications
Food contact, Food approval FDA 21 CFR
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.