Material datasheets available free. Online registration at: www.materialdatacenter.com
GUR - PE-UHMW - Celanese
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "GUR" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...attractive field for the future which requires the chemical resistance, conductivity and barrier properties of Vectra LCP. Medical Engineering Ticona also has a strong market position for another high-performance plastic – ultrahigh molecular GUR. Apart from its use as a high-performance additive in paints, coatings, rubber and seals, GUR is also used to a large extent in medical engineering today. In the light of its many years' experience in medical engineering applications, Ticona has se...
Kunststoffe international, 2005-11-21, In Contact with Drinking Water
...t. A similar situation arises for Ticona’s other engineering plastics for the sanitary and drinking water range. There are also polyphenylene sulphide (PPS; grade: Fortron), ultra-high molecular weight polyethylene (PE-UHMW; grade: GUR), polybutylene terephthalate (PBT; grade: Celanex) and long fibre reinforced thermoplastics (LFT; grade: Celstran). Conclusion The proposed European drinking water regulations not only lead to changed market conditions, but also require raw material manufacturer...
Kunststoffe international, 2005-11-21, Medical Technology for the Mass Market
...nge which have proved their suitability for the field of medical technology over many years: POM (grade: Hostaform/Celcon), PBT (grade: Celanex), PET (grade: Impet), TPE-E (grade: Riteflex), LCP (grade: Vectra), COC (grade: Topas), PE-UHMW (grade: GUR) and PPS (grade: Fortron). Depending on the particular grade, these plastics fulfil all the decisive requirements for medical technology, such as exceptionally low extractable content, very good chemical resistance, high dimensional stability, good...
Kunststoffe international, 2007-09-19, Create Progress. Together!
...nd sales sectors and application development." The main pillar of Ticona’s Asian growth strategy will be China: Back in mid-May, Ticona celebrated the groundbreaking ceremony for two new production plants in Nanjing – one for GUR UHMW-PE and the other for Celstran LFT. Both plants are scheduled to come on stream in 2008. As a result, the company’s global capacity for GUR will increase to over 90,000t/a and capacity for Celstran to more than 35,000t. In February this year, Ticona announced th...
Kunststoffe international, 2013-01-28, Changing Surface Properties
...lar polyethylene powders instead could lower costs. Plasma technology also affords a way of treating other powdered materials such as CNT (carbon nanotubes), metal powders and pigments. Plasma activation as a means of selectively hydrophilizing GUR, an ultrahighmolecular-weight polyethylene (UHMWPE; manufacturer: Ticona GmbH, Sulzbach, Germany), is already well established on the market. This PE is an efficient industrial additive for paints, lubricating paints, coatings, plastics, rubber, gaske...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.