Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Fiberfil® M-2450 BK9083 - PP-T20 - LyondellBasell Industries

Material Data Center offers the following functions for Fiberfil® M-2450 BK9083:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Fiberfil datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ASTM 데이터
용융 흐름성, MFI 1 g/10min ASTM D 1238
온도 230 °C -
하중 2.16 kg -
기계적 특성단위시험규격
ISO 데이터
인장탄성률 2100 MPa ISO 527
항복강도 23 MPa ISO 527
항복변형률 80 % ISO 527
굴곡 계수, 23°C 1250 MPa ISO 178
굴곡 강도 35 MPa ISO 178
아이조드 충격은 노치, +23°C 27 kJ/m² ISO 180/1A
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 55 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 95 °C ISO 75-1/-2
기타 특성단위시험규격
밀도 1040 kg/m³ ISO 1183
특징
인도 유형
펠렛 (입자,알갱이), 검정
특성
Copolymer
Certifications
RoHS
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.