Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmopan 3059D - TPU - Covestro Deutschland AG

Check here, which other Desmopan datasheets, application examples or technical articles are available in Material Data Center

기계적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

• Injection molding grade
• with release agent
• excellent abrasion resistance
• good wear resistance
• very short cycle times
  Application:
• Heel patches
• Rollers
• Boot shells
• Injection molded engineering parts

기계적 특성	값	단위	시험규격
ISO 데이터
10% 변형시 강도	12.4	MPa	ISO 527
100% 변형시 강도	21	MPa	ISO 527
300% 변형시 강도	42	MPa	ISO 527
파단시 강도 TPE	50	MPa	ISO 527
파단시 신율 TPE	>300	%	ISO 527
70 C, 영구 압축줄음율, 24h	42	%	ISO 815
100 C, 영구 압축줄음율, 24h	24	%	ISO 815
전단강도	160	kN/m	ISO 34-1
내마모성	18	mm³	ISO 4649
쇼어 A 경도	97	-	ISO 7619-1
쇼어 D 경도	59	-	ISO 7619-1

기타 특성	값	단위	시험규격
밀도	1230	kg/m³	ISO 1183

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	110	°C	-
Pre-drying - Time	1 - 2	h	-
Processing humidity	≤0.05	%	-
용융수지온도	220 - 240	°C	-
성형온도	20 - 40	°C	-

도표

특징

생산 공정

사출 성형

부가물

이형제

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

PREPROCESSING
Max. water content: 0.05 %
Max. drying temperature: 110 °C
Drying time:
Dry air dryer 1-2 h

PROCESSING
Melt temperature: 220-240 °C
Mold temperature: 20-40 °C

기타 압출

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

프로파일 압

 Preprocessing

Max. Water content	≤0.05 %
Drying temperature	70-110 °C
Dry air dryer	1-2 h

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.