Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELANEX® 3315-32 - PBT-GF30 - Celanese

Material Data Center offers the following functions for CELANEX® 3315-32:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Celanex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
This is a preliminay data sheet.
Celanex 3315-32 is a flame retarded, 30% fiberglass reinforced polybutylene terephthalate which has an excellent balance of mechanical properties and processability. It is well suited for electrical connector applications

Flammability at thickness h (3.2 mm)V-0-
Processing/Physical Characteristics단위시험규격
ISO 데이터
성형 수축률, 평행 0.3 % ISO 294-4, 2577
성형 수축률, 수직 1.0 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
파단시 강도 145 MPa ISO 527
파단시 신율 2.3 % ISO 527
챠피 노치드 충격 강도, +23°C 8.5 kJ/m² ISO 179/1eA
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 225 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 205 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 215 °C ISO 75-1/-2
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 3.2 mm -
전기적 특성단위시험규격
ISO 데이터
부피 저항 >1E13 Ohm*m IEC 62631-3-1
전기 압력 22 kV/mm IEC 60243-1
기타 특성단위시험규격
물에서의 흡수성 0.3 % ISO 62와 유사
밀도 1610 kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
부가물
윤활제
특별 특성
난연성
응용
전기 및 전자
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.