Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELANEX® 1700FC - PBT - Celanese

Material Data Center offers the following functions for CELANEX® 1700FC:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Celanex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Celanex 1700FC is a very high molecular weight extrusion grade of unreinforced polybutylene terephthalate for use in food contact applications.

Flammability at thickness h (0.75 mm)HB-
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 4.5 cm³/10min ISO 1133
온도 250 °C -
하중 2.16 kg -
성형 수축률, 평행 1.9 % ISO 294-4, 2577
성형 수축률, 수직 1.9 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
인장탄성률 2500 MPa ISO 527
항복강도 60 MPa ISO 527
항복변형률 6 % ISO 527
파단시 평균신율 >50 % ISO 527
챠피 충격 강도 , +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 220 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 7.5 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 7 kJ/m² ISO 179/1eA
쇼어 D 경도 80 - ISO 7619-1
열적 특성단위시험규격
ISO 데이터
녹는점, 10°C/min 225 °C ISO 11357-1/-3
유리 전이 온도, 10 °C/min 60 °C ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa 50 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 150 °C ISO 75-1/-2
비카트 연화 온도, B 182 °C ISO 306
선형 열팽창 계수, 평행 110 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 92 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.8 mm -
산소지수로서의 난연성 22 % ISO 4589-1/-2
전기적 특성단위시험규격
ISO 데이터
상대 유전율, 100Hz 4 - IEC 62631-2-1
상대 유전뮬, 1MHz 3.6 - IEC 62631-2-1
소산 인자, 100Hz 14 E-4 IEC 62631-2-1
소산 인자, 1MHz 210 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
전기 압력 23 kV/mm IEC 60243-1
기타 특성단위시험규격
물에서의 흡수성 0.45 % ISO 62와 유사
조건에서의 흡습성 0.2 % ISO 62와 유사
밀도 1310 kg/m³ ISO 1183
도표
동전단탄성율-온도 , CELANEX® 1700FC, PBT, Celanese
응력-신율 , CELANEX® 1700FC, PBT, Celanese
시컨트탄성율-신율 , CELANEX® 1700FC, PBT, Celanese
특징
생산 공정
필름 압출, 외형 압출, 시트 압출, 기타 압출
인도 유형
펠렛 (입자,알갱이)
Certifications
Food contact
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.