Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ISO 데이터 |
용융 흐름성, MFI |
6 |
g/10min |
ISO 1133 |
온도 |
200 |
°C |
- |
负荷 |
5 |
kg |
- |
성형 수축률, 평행 |
0.5 |
% |
ISO 294-4, 2577 |
기계적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
인장 강도 |
18 |
MPa |
ISO 527 |
굴곡 계수, 23°C |
1100 |
MPa |
ISO 178 |
굴곡 강도 |
21 |
MPa |
ISO 178 |
챠피 충격 강도, +23°C |
N |
kJ/m² |
ISO 179/1eU |
챠피 노치드 충격 강도, +23°C |
N |
kJ/m² |
ISO 179/1eA |
Type of failure |
(P) |
- |
- |
쇼어 D 경도 |
55 |
- |
ISO 7619-1 |
로크웰 경도 |
R 10 |
- |
ISO 2039-2 |
열적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
하중하에서의 변형온도, 1.80 MPa |
60 |
°C |
ISO 75-1/-2 |
비카트 연화 온도, A |
72 |
°C |
ISO 306 |
광학 특성 | 값 | 단위 | 시험규격 |
ISO Data |
탁도 |
2 |
- |
ISO 14782 |
Other Standards[S] |
광선 투겠淅 |
89 |
% |
ISO 13468 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
기타 특성 | 값 | 단위 | 시험규격 |
물에서의 흡수성 |
0.1 |
% |
ISO 62와 유사 |
밀도 |
1010 |
kg/m³ |
ISO 1183 |
Processing Recommendation Injection Molding | 값 | 단위 | 시험규격 |
용융수지온도 |
180 - 220 |
°C |
- |
성형온도 |
50 |
°C |
- |
Zone 1 |
180 - 200 |
°C |
- |
Nozzle temperature |
200 |
°C |
- |
Injection pressure |
67 |
MPa |
- |
Back pressure |
6 |
MPa |
- |
Processing Recommendation Extrusion | 값 | 단위 | 시험규격 |
성형온도 |
60 - 80 |
°C |
- |
Zone 1 |
170 |
°C |
- |
Zone 2 |
180 |
°C |
- |
Zone 3 |
185 |
°C |
- |
Zone 4 |
190 |
°C |
- |
Zone 5 |
200 |
°C |
- |
Nozzle temperature |
200 |
°C |
- |
특징
생산 공정
사출 성형, 기타 압출
특별 특성
고충격 또는 고충격 보강, 투명도
특성
High Gloss, Copolymer
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com