Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Amilan® U625 X21 - PA66 - Toray Industries, Inc.

Material Data Center offers the following functions for Amilan® U625 X21:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Amilan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
기계적 특성건조/응축단위시험규격
ISO 데이터
인장 강도 55 / 40 MPa ISO 527
파단시 신율 40 / 50 % ISO 527
굴곡 계수, 23°C 1900 / 700 MPa ISO 178
굴곡 계수 2400 / - MPa ISO 178
굴곡 계수-温度 -40 °C -
챠피 노치드 충격 강도, +23°C 89 / 100 kJ/m² ISO 179/1eA
로크웰 경도 R 114 - ISO 2039-2
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 265 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 63 / * °C ISO 75-1/-2
선형 열팽창 계수, 평행 105 / * E-6/K ISO 11359-1/-2
기타 특성건조/응축단위시험규격
물에서의 흡수성 7 / * % ISO 62와 유사
밀도 1080 / - kg/m³ ISO 1183
특징
특별 특성
고충격 또는 고충격 보강
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.