Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TOYOLAC® 844V-X05 - ABS - Toray Industries, Inc.

Material Data Center offers the following functions for TOYOLAC® 844V-X05:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toyolac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
This material is produced by Toray Plastics (Malaysia).
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 34 g/10min ISO 1133
温度 220 °C -
荷重 10 kg -
機械的特性値単位テスト基準
ISO データ
引張強度 43 MPa ISO 527
破壊ひずみ 5 % ISO 527
曲げ弾性率, 23°C 2100 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 14 kJ/m² ISO 179/1eA
ロックウェル硬度 R 105 - ISO 2039-2
ASTM数据
引張強度 41 MPa ASTM D 638
破断伸び 5 % ASTM D 638
曲げ弾性率 2230 MPa ASTM D 790
ロックウェル硬度 R 105 - ASTM D 785
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 74 °C ISO 75-1/-2
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
厚さhでの燃焼性 5V 5VA class IEC 60695-11-20
試験片の厚さ 2.5 mm -
ASTM数据
DTUL @ 264 psi 82 °C ASTM D 648
その他の特性.値単位テスト基準
密度. 1160 kg/m³ ISO 1183
密度 1160 kg/m³ ASTM D 792
特殊な特性
添加剤.
難燃剤.
特殊な特性.
難燃.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.