Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TOYOLAC® 844V-X05 - ABS - Toray Industries, Inc.

Material Data Center offers the following functions for TOYOLAC® 844V-X05:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Toyolac datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caractéristiques des transformations/physiques - Propriétés mécaniques - Propriétés thermiques - Propriétés diverses
Any use of this information falls under the rules of our disclaimer.
Informations produit
This material is produced by Toray Plastics (Malaysia).
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ISO Data
Indice de fluidité, MFI 34 g/10min ISO 1133
Température 220 °C -
Charge 10 kg -
Propriétés mécaniquesValeurUnitéNorme du test
ISO Data
Résistance à la traction 43 MPa ISO 527
Déformation à la rupture 5 % ISO 527
Module de flexion, 23°C 2100 MPa ISO 178
Résistance au choc Charpy (entaillé), +23°C 14 kJ/m² ISO 179/1eA
Dureté Rockwell R 105 - ISO 2039-2
ASTM Data
Module de traction 41 MPa ASTM D 638
Allongement à la rupture 5 % ASTM D 638
Module de flexion 2230 MPa ASTM D 790
Dureté Rockwell R 105 - ASTM D 785
Propriétés thermiquesValeurUnitéNorme du test
ISO Data
Température de fléchissement s/chrg, 1.80 MPa 74 °C ISO 75-1/-2
Inflammabilité ep. nom. 1.5 mm V-0 class IEC 60695-11-10
Epaisseur de l'éprouvette 1.5 mm -
Inflammabilité 5V pr. épaisseur h 5VA class IEC 60695-11-20
Epaisseur de l'éprouvette 2.5 mm -
ASTM Data
DTUL à 264 psi 82 °C ASTM D 648
Propriétés diversesValeurUnitéNorme du test
Masse volumique 1160 kg/m³ ISO 1183
Densité 1160 kg/m³ ASTM D 792
Caractéristiques
Additifs
Agent ignifugeant
Propriétés spéciales
Ignifugé
Disponibilité régionale
Amérique du nord, Europe, Asia Pacific, South and Central America
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.