Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 318BJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 318BJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - 光学特性 - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文
SABIC® LLDPE 318BJ is a butene linear low density polyethylene resin typically designed for easy processing and specially formulated for optimum thermal stability at high temperatures used in cast film extrusion. Cast film produced from SABIC® LLDPE 318BJ exhibit excellent optical properties, puncture resistance and tear strength .SABIC® LLDPE 318BJ is TNPP free. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 2.8 g/10min ASTM D 1238
温度 190 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
ショア硬さD 48 - ISO 7619-1
ASTM数据
降伏応力 12 MPa ASTM D 638
破壊応力 13 MPa ASTM D 638
降伏点伸び 16 % ASTM D 638
破断伸び 710 % ASTM D 638
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 102 °C ISO 306
ASTM数据
ビカット軟化温度 98 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
誘電正接, 60 Hz 0.0005 - ASTM D 150
比誘電率, 60 Hz 2.2 - ASTM D 150
体積抵抗率 >1E15 Ohm*cm ASTM D 257
光学特性値単位テスト基準
ASTM数据
光沢度 90 - ASTM D 2457
ヘイズ 5 % ASTM D 1003
機械的特性(ィルム)値単位テスト基準
ISO データ
トラウザー引裂抵抗, 直角 140 N/mm ISO 6383-1
ASTM Data
引張弾性率, 平行 28 MPa ASTM D 882
引張弾性率, 直角 600 MPa ASTM D 882
降伏応力, 平行 13 MPa ASTM D 882
降伏応力, 直角 10 MPa ASTM D 882
破壊応力, 平行 28 MPa ASTM D 882
破壊応力, 直角 18 MPa ASTM D 882
破断伸び, 平行 470 % ASTM D 882
破断伸び, 直角 600 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.